top of page

Intamsys

FUNMAT PRO 310

Bring industrial performance to your desktop

Quick change printheads with IDEX technology. Independent dual extruder (IDEX), for different printing modes as dual material printing, mirror printing, copy printing. Modular design of the printhead, quick-change system for easy installation and replacement and convenient maintenance. Dual-drive gear extruder, increase the contact surface for more torque and higher reliability.

Discover the FUNMAT PRO 310

Key features

Ext-Temp-1.jpg

Extruder Temp
300°C

Bed-Temp.jpg

Bed Temp
160°C

Chamber-Temp.jpg

Chamber Temp
100°C

Build Size
305x260x260mm

Trusted by the world's top designers and engineers

Widely Applied in the Industrial Manufacturing Areas

A staple of industrial manufacturing, print multiple engineering materials

materials_1.png

Multiple Printing Modes for Multiple Printing Needs

07_00_00_3D_Printing_Industry_Dual_Extrusion_IDEX-1.gif

Full-Size Engineering Plastic Printing

Superior 100°C thermostatic chamber for enhanced mechanical properties of printed parts

superior100.jpg

Up to 100°C Chamber

Actively heated thermostatic build chamber with temperatures up to 100°C,

ensuring low internal stresses and good interlayer bonding of parts.

Provide better mechanical properties and suitable for printing all types of engineering plastics.

superior_1.png

Full-size Printing

Reduce thermal deformation and shrinkage of the model during the printing process, avoid warping to achieve large format full size (305mm*260mm*260mm) printing.​

superior_2.png

PC Printing in Heated Chamber VS Unheated Chamber

The engineering material PC is significantly affected by temperature during the printing process. When the length of one edge exceeds 150mm, 100°C constantly heated chamber can avoid warping, delamination cracking, deformation and other problems of the printed part.​​

superior_3.png

PC Printing in Heated Chamber VS Unheated Chamber

Based on the insights of the material properties and the optimization of the printing process precipitation, the best performance of the material can be achieved. It could improve the Z-direction tensile strength of the printed parts.

Up to 20 days of continuous high quality printing

INTAM™Box, with reusable molecular sieve to keep filament dry
Ensures optimal printing conditions for the materials

materials_5.jpg

Independent Sealed Keep Dry Filament Box

Standard independent sealed keep dry chamber, with reusable molecular sieve. Its active moisture absorption function keeps long-term low humidity with no need to dry the filaments repeatedly.

materials_6.jpg

Anti-tangle Design

The anti-tangle design avoids tangling and knotting of filament to ensure continuous printing effect.

materials_7.jpg

Printing with Dry Filament VS Damp Filament

Compared with damp filament, printing with dry filament may avoid drawing, bubbles, burrs, ensuring that nylon (PA, PA-CF) and other moisture-absorbent materials achieve continuous high-quality printing.

More Delicate Surface Finish of Complex Geometries

Ensure high-quality surface finish of printed parts in ABS/PC/PC-ABS/PA/PA-CF and other engineering materials

idex.jpg

Independent Dual Extruders (IDEX) Design

Two printheads can run independently of each other along the same axis during the printing process, which ensures the printing quality of complex geometries parts in conjunction with the engineering material support solution.

idex_2.png
idex_3.png

Water-soluble Support Materials

The independent dual extruder design makes it easy to remove the support material without having to worry about the roughness of the contact surface caused by the peeling of the support material.

Easy-to-breakaway Support Material

The independent dual extruder design makes it easy to remove the support material without having to worry about the roughness of the contact surface caused by the peeling of the support material.

Unparalleled Customer Experience

FUNMAT PRO 310 provides a good experience for 3D printing beginners and experts alike

uce_1.jpg

Enhanced Printing Platform

Auto mesh leveling with 100 points surface flatness measurement and automatic Z-axis compensation. Flexible build plate for easy part removal. Glue-free bed adhesion

uce_4.jpg

User-friendly Interface

Intelligent interactive design, user-friendly interface, with task queue management function.

uce_3.jpg

Modular Design

Plug and play modular design makes it easy to disassemble and maintain.

New Slicing Software
INTAMSUITE™ NEO

Automated slicing for both model design and repair

All-in-One collaborative additive manufacturing platform for

online monitoring and print process optimization

pc_1_edited.png

Health & Safety

High-standard safety design to ensure the health and safety of users

uce_1.jpg

Built-in Air Filtration System

The HEPA filter can capture small particles generated during the printing process, and the activated carbon can absorb volatile chemicals emitted during the process.

uce_4.jpg

Electromagnetic Door Lock and Door Opening Detection Sensor

Avoid personal danger caused by misoperation during printing.

uce_3.jpg

Overall Thermal Insulation Design

Excellent thermal insulation design (thickened insulation layer, front door with double glass, temperature-resistant cover on the top) while the printer's working.

Get in touch with us today! Find out the most efficient 3D printing solutions and service tailored for your application

bottom of page