top of page
1.png

Add:North PETG

About The Materials 

Materials Documentations

add:north's PETG combines the properties from both PLA and ABS.


It is odorless, has low warping and a high impact resistance. PETG also has the highest transparency among all our filaments and is available in a number of different colors.


PETG has grown to be one of the most popular materials for many users. It has in many ways replaced ABS as the primary material for technical applications mainly because of its chemical resistance.


* Combines properties from PLA & ABS

* High impact resistance

* Low warping


[Specification]

Diameter tolerance: ±0.025mm

Spool size:

   140 x 54 x 44 mm (100 - 250 g)

   200 x 52 x 55 mm (500 - 1000 g)

   200 x 52 x 66 mm (1000 g Economy lines)

   300 x 52 x 102 mm (1500 - 2300 g)

   350 x 52 x 100 mm (5000g)

Weight filament: 750g

Weight empty spool

   110 g (100 - 250 g)

   215 g (500 - 1000 g)

   235 g (1000 g Economy lines)

   545 g (1500 - 2300 g)

   785 g (5000g)

BPH free: Yes

Wear resistance: High

Chemical resistance: High

Working temperature: 75°C

Density: 1.27

REACH: Yes

Hygroscopy: High

Silicone free: Yes

Recyclable: Yes

UV resistance: High

Print temperature: 225-260 °C

ROHS: Yes

Bed temperature: No (or up to 80 °C)


[Print Guide]

TEMPERATURES

225-260 degrees in the nozzle and up to 75 degrees on the build plate. There are two primary factors influenced by the temperature: 


* Layer adhesion. Layer adhesion increases with increased temperature. It is usually good for bed adhesion to also print the first layer a bit warmer than the rest of the model, on the nozzle as well as the print bed.

* Flow. With increased temperature, the flow increases (the viscosity decreases). This may have to be compensated with a somewhat increased retraction distance and retraction speed. Conversely, low-temp prints needs a bit less retraction. Always try to use as little retraction (distance and speed) as possible, so it just prevents the stringing you want to get rid of. 


We recommend to print a temptower when first using a new material, to find the sweetspot of your printer. 


[Cheat Sheet] -Request the file from us 

Cura / Simplyfy3D / PursaSlicer


📌Royalforged Solution Malaysia📌

Contact No. : 011-56304686 (Jason) 

Business WA: https://wa.me/message/PHBHMKAGAC6IJ1

Official Web: https://www.royalforgedsolution.com


===Authorised Add:North Reseller Malaysia===

应用

基本材料数据