top of page
1.png

Fiberlogy ASA

About The Materials 

Materials Documentations

Thanks to its resistance to UV radiation, high temperatures and humidity, Fiberlogy ASA is the perfect choice for all 3D printing applications that will be exposed to weather conditions. High mechanical and thermal resistance (up to 94°C) and ease of printing make this material a great replacement for ABS, ensuring its popularity in the automotive industry and in the manufacturing of everyday items.


ASA (acrylonitrile-styrene-acrylate), due to its clearly lower shrinkage than ABS, does not require a heated chamber to ensure a successful print. Unlike its predecessor, ASA gives off much less annoying odours. Less shrinkage and good adhesion prevent the model from curling and cracking and ensure high stability of the print dimensions.


The finished model made with Fiberlogy ASA can be smoothed by exposure to acetone. The material is suitable for sanding and painting. It can also be glued with acetone.


APPLICATION IN 3D PRINTING:

* AUTOMOTIVE: car and motorcycle parts, accessories, substitutes;

* SPORT: guards, sport accessories, spare parts;

* HOME AND GARDEN: decorations, equipment, tools, everyday objects;

* ELECTRONICS: sensor and microcontroller housings.


PROPERTIES:

* high UV resistance

* high durability

* lasting colours

* resistance to temperatures up to 94°C

* possibility of finished model machining

* low odour emission compared to ABS


DIAMETER

1.75 MM


DIAMETER TOL

+ 0.02 mm


OVAL TOL

+/- 0.01 mm


PRINTING TEMP

255-270°C


TABLE TEMP

90-110°C



HOW TO PRINT?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 


NOZZLE TEMPERATURE

255-270°C


BED TEMPERATURE

90-110°C


CLOSED CHAMBER

not required


FAN

0-25%


FLOWRATE

90-100%


PRINTING SPEED

< 100 mm/s


SURFACE

glass, kapton tape, ABS juice


RETRACTION (DIRECT)

yes, 1-2 mm


RETRACTION (BOWDEN)

yes, 4-6 mm


RETRACTION SPEED

20-45 mm/s


NOTES

When printing without a heated chamber, it is recommended to avoid exposing the model to gusts of wind/drafts


📌Royalforged Solution Malaysia📌

Contact No. : 011-56304686 (Jason) 

Business WA: https://wa.me/message/PHBHMKAGAC6IJ1

Official Web: https://www.royalforgedsolution.com


===Authorozed Fiberlogy Reseller Malaysia===

应用

基本材料数据