Fiberlogy BVOH

The BVOH FILAMENT from Fiberlogy is a butene-diol vinyl alcohol copolymer. It can be used to print perfect prototypes, complex structures and movable mechanisms. It particularly comes in handy where traditional supports could be difficult to remove or would not be sufficient to obtain a satisfactory final print result. With BVOH, printing highly complex 3D objects is extremely easy.

Supports created using BVOH filament are VERY EASY TO REMOVE. After printing a 3D model, simply place it in warm water and the support filament will dissolve completely. This will result in the actual model being of noticeably better quality than in the case of supports which have to be broken out.

The BVOH filament can be used with printers with a double extruder. It is characterized by HIGH ADHESION TO VARIOUS TYPES OF MATERIALS. It can be combined with popular materials such as PLA, ABS, PET-G, ASA, Nylon, elastic filaments (e.g. TPU), etc.

The filament should be stored in a dry place, e.g. in a sealed bag, in order to avoid wetting of the material and the resulting deterioration of its properties.

APPLICATION IN 3D PRINTING:

* PROTOTYPES: functional prototypes, small-size models, models with empty spaces

* DECORATIONS: complex structures, ornaments with numerous details, vases, jewellery

* MECHANISMS: moving elements, mechanisms printed as a whole

PROPERTIES:

* soluble in warm water

* high adhesion to PLA, ABS, ASA, PET-G, Nylon, TPU and other filaments

* environmentally friendly – can be disposed of in your home sewage system

DIAMETER

1.75 MM

DIAMETER TOL

+/- 0.02 mm

OVAL TOL

+ 0.01 mm

PRINTING TEMP

190-220°C

TABLE TEMP

50-70°C

HOW TO PRINT?

THE FOLLOWING PARAMETERS ARE ONLY SUGGESTED PRINT SETTINGS FOR THIS MATERIAL. TO ENSURE THE BEST PRINT QUALITY, IT IS NECESSARY TO CHOOSE THE APPROPRIATE SETTINGS FOR A SPECIFIC PRINTER AND PRINTING CONDITIONS.

NOZZLE TEMPERATURE

190-220°C

BED TEMPERATURE

50-70°C

CLOSED CHAMBER

not required

FAN

75-100%

FLOWRATE

95-105%

PRINTING SPEED

< 35 mm/s

SURFACE

glass, masking tape

RETRACTION (DIRECT)

2-3 mm

RETRACTION (BOWDEN)

4-6 mm

RETRACTION SPEED

20-45 mm/s

NOTES

Protect from moisture (Store filament in tightly sealed containers when not in use)

📌Royalforged Solution Malaysia📌

Contact No. : 011-56304686 (Jason) 

Business WA: https://wa.me/message/PHBHMKAGAC6IJ1

Official Web: https://www.royalforgedsolution.com

===Authorozed Fiberlogy Reseller Malaysia===