top of page
1.png

Fiberlogy HIPS

About The Materials 

Materials Documentations

HIPS filament is a base in both meanings of this word: its properties allow it to be used as a basic filament and also as a support for other materials.


Using it in printing will give you a light and good-looking print with a matt surface. You can polish it and even coat it with acrylic paint. This allows each model or miniature to look very tasteful.


You can also decide to use it as a supporting material for prints that have large overhangs or non-standard shapes. You just need to immerse the print in D-limonene after this. It will dissolve the HIPS, leaving only the proper print.


APPLICATION IN 3D PRINTING:

* COSTUMES OR THEIR ELEMENTS: masks, parts of costumes, helmets

* MODELING: mock-ups, figures

* PROTOTYPES: durable and lightweight elements

* DECORATIVE ELEMENTS: decorations, hanging elements, lamps

* JOINING WITH OTHER FILAMENTS: support for other prints


PROPERTIES:

* lighter than other materials

* matt surface

* soluble in D-limonene

* can be polished, glued and covered with acrylic paint

DIAMETER

1.75 MM


DIAMETER TOL

+/- 0.02 mm


OVAL TOL

+ 0.01 mm


PRINTING TEMP

230-245°C


TABLE TEMP

80-100°C


HOW TO PRINT?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.


NOZZLE TEMPERATURE

230-245°C


BED TEMPERATURE

80-100°C


CLOSED CHAMBER

recommended


FAN

0-10%


FLOWRATE

95-105%


PRINTING SPEED

35-60 mm/s


SURFACE

glass, masking tape


RETRACTION (DIRECT)

2-3 mm


RETRACTION (BOWDEN)

4-6 mm


RETRACTION SPEED

20-45 mm/s


📌Royalforged Solution Malaysia📌

Contact No. : 011-56304686 (Jason) 

Business WA: https://wa.me/message/PHBHMKAGAC6IJ1

Official Web: https://www.royalforgedsolution.com


===Authorozed Fiberlogy Reseller Malaysia===

应用

基本材料数据