FormFutura® EasyFil HIPS

EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.EasyFil HIPS is very chemically inert and has outstanding characteristics with respect to hygiene, strength and heat resistance and it prints really smoothly and in fine detail with an extremely matte surface finish. EasyFil HIPS printed parts are very light-weight and can easily be glued together with a variety of adhesives.

Unique features

• Very limited warping

• High impact resistance

• Extremely smooth matte surface finish

• Light-weight and durable

• High ESCR resistance

• Engineered to meet UL 94HB flame retardancy standards

• Easily to glue with various adhesives

• HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives

General printing guidelines *

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 104%

Print temp: ± 220 - 260° C

Print speed: Medium

Retraction: Yes ± 5mm

Heat bed: ± 90 - 110° C

Fan speed: 0-30%

Experience level: Intermediate

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.    

Compliance *

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC

• REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.