Add:North PETG
About The Materials
Materials Documentations
add:north's PETG combines the properties from both PLA and ABS.
It is odorless, has low warping and a high impact resistance. PETG also has the highest transparency among all our filaments and is available in a number of different colors.
PETG has grown to be one of the most popular materials for many users. It has in many ways replaced ABS as the primary material for technical applications mainly because of its chemical resistance.
* Combines properties from PLA & ABS
* High impact resistance
* Low warping
[Specification]
Diameter tolerance: ±0.025mm
Spool size:
140 x 54 x 44 mm (100 - 250 g)
200 x 52 x 55 mm (500 - 1000 g)
200 x 52 x 66 mm (1000 g Economy lines)
300 x 52 x 102 mm (1500 - 2300 g)
350 x 52 x 100 mm (5000g)
Weight filament: 750g
Weight empty spool
110 g (100 - 250 g)
215 g (500 - 1000 g)
235 g (1000 g Economy lines)
545 g (1500 - 2300 g)
785 g (5000g)
BPH free: Yes
Wear resistance: High
Chemical resistance: High
Working temperature: 75°C
Density: 1.27
REACH: Yes
Hygroscopy: High
Silicone free: Yes
Recyclable: Yes
UV resistance: High
Print temperature: 225-260 °C
ROHS: Yes
Bed temperature: No (or up to 80 °C)
[Print Guide]
TEMPERATURES
225-260 degrees in the nozzle and up to 75 degrees on the build plate. There are two primary factors influenced by the temperature:
* Layer adhesion. Layer adhesion increases with increased temperature. It is usually good for bed adhesion to also print the first layer a bit warmer than the rest of the model, on the nozzle as well as the print bed.
* Flow. With increased temperature, the flow increases (the viscosity decreases). This may have to be compensated with a somewhat increased retraction distance and retraction speed. Conversely, low-temp prints needs a bit less retraction. Always try to use as little retraction (distance and speed) as possible, so it just prevents the stringing you want to get rid of.
We recommend to print a temptower when first using a new material, to find the sweetspot of your printer.
[Cheat Sheet] -Request the file from us
Cura / Simplyfy3D / PursaSlicer
📌Royalforged Solution Malaysia📌
Contact No. : 011-56304686 (Jason)
Business WA: https://wa.me/message/PHBHMKAGAC6IJ1
Official Web: https://www.royalforgedsolution.com
===Authorised Add:North Reseller Malaysia===