FormFutura® Economy LCD Resin
About The Materials
This resin is easy to use and allows you to 3D print objects with fine detail.
Materials Documentations
FormFutura Economy LCD Resin is our entry level 3D printing resin. This resin is ideal for beginners and prints with a very limited smell. It combines accuracy with short curing times and a nice matte surface finish. Our Economy LCD Resin makes resin 3D printing more accessible, with a retail price of €29,95 per kg. Resin printing doesn't have to be more expensive than 3D printing with filament!
Important key features
Easy to use general purpose LCD resin.
Excellent printability properties & limited smell.
Matte surface finish with fine detail.
Good compatibility with all DLP and LCD / MSLA 3D printers in the range of 385 – 420nm.
Suitable applications
3D printing figurines, miniatures and models.
3D printing functional prototypes.
3D printing end-use products.
Physical properties after post curingThis data provided for those properties are typical values, and should not be construed as sales specifications.
Specimen printed in ZXY Orientation (ISO 52921) and examined according to ISO 17296-3.
Preparation(s) before starting to print
Shake the bottle for at least 2 minutes before each use.
After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
The resin can be poured back from the vat into the bottle once your print is finished
Always use protective measurements like safety glasses and nitrile gloves when handling resins.
Post-processing
We do advise you to post-process your 3D print in order to achieve the material properties
Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5-10 minutes
An ultrasonic cleaner is preferred/recommended
Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing to prevent warping or cracking.
Place the rinsed parts in a well-ventilated area for at least 4 hours, or use pressurized air for at least 5 minutes
Cure your object in a high power curing chamber (like the CUREbox™ Plus) for approximately 60 minutes at 65°CAnd after that approximately 2 hours of thermal curing at 100°C. The preferred curing wavelength is between 300-410nm
Comparison of technical specifications for FormFutura Engineering LCD Series 3D printing resin
Within our Engineering LCD Series of 3D printing resins, each resin focuses on a specific property. The table below shows the technical data for all our Engineering LCD resins and makes it easy to compare resins based on their mechanical properties.
Safety
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.