FormFutura® High Gloss PLA ColorMorph
About The Materials
High Gloss PLA – ColorMorph combines two High Gloss PLA colors in one filament. As a result the color of 3D printed objects will change with every change in light source or viewing angle.
Materials Documentations
FormFutura High Gloss PLA – ColorMorph combines the best of two High Gloss PLA colors in one filament. This high-end filament combines all benefits of High Gloss PLA with innovative multicolor aesthetics.The beautiful color morphing properties of this filament will create multicolored effects from all angles. Experience a stunning color shift with every change in light source or viewing angle.
Important key features
3D print objects with beautiful color shifting aesthetics
Create beautiful objects with a smooth and silky surface finish
Make flawless creations without visible layers
Available in 7 brilliant two-tone color morphing variants
Suitable applications
Suitable for applications in aesthetics, design, and art
Suitable for home decoration and household articles
Suitable for creative ideas and visualization projects
General printing guidelines *
Nozzle size: ≥ 0.15mm
Layer height: ≥ 0.10mm
Experience level: Beginner
Print temp: ± 215 - 245° C *
Buildplate adhesion: EasyFix Nr. I
Fan speed: 50-100%
Heat bed: ± 60° C
Enclosure needed: No
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
*) If you use a vanadium steel / hardened steel and/or tungsten carbide nozzle then please raise the printing temperature up to 240 - 245° C to maintain the high gloss. If you still have trouble losing the shine, you can drop the part cooling fan to 50% or lower. For brass and copper nozzles you can print at215 - 225° C. Please do feel free to experiment with these settings.
Compliance *
This filament is compliant to below-listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.