LUVOCOM® 3F PAHT 9825 NT

LUVOCOM® 3F PAHT 9825 NT

LUVOCOM® 3F filament PAHT 9825 NT is a high temperature resistant polyamide (PA) -based, unfilled material. It has the strength of a PA6 without affecting its printability. LUVOCOM® 3F PAHT 9825 NT is a material from LEHVOSS. 3D-printed components made from this material have high strength and toughness. It has a low influence from moisture and temperature on dimensional stability and electrical properties. Can be used in the automotive industry, textile- and office machinery, apparatus- and precision engineering.

Features:

• Lehvoss Luvocom 3F PAHT 9825 NT inside

• Unreinforced PA6 filament with high strength and toughness

• Temperature resistant up to 160 °C (200h)

• 50% reduced water uptake at a four times slower rate compared to other PA6 filaments

• Tensile strength up to 85 MPa

• 3D prints with high dimensional accuracy and increased layer adhesion

• Good electrical properties

Packaging

LUVOCOM® 3F PAHT 9825 NT is available on carton spools, repacked under quality control of Lehmann&Voss&Co

Additional information

Recommended temperature for heated bed is ± 60-70˚C. Adhesion is possible on different surfaces. LUVOCOM® 3F PAHT 9825 NT can be used on all common desktop FDM technology or FFF 3D printers. Dry the spool before printing: 12 hours at 70°C or 4 hours at 100°C.

Storage

Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.