LUVOCOM® 3F PEEK 9581 NT

LUVOCOM® 3F PEEK 9581 NT

LUVOCOM® 3F PEEK 9581 NT is based on polyetheretherketone (PEEK), one of the highest performing engineering thermoplastics in the world and can replace metals and composites. LUVOCOM® 3F PEEK 9581 NT is a material from LEHVOSS. LUVOCOM® 3F PEEK 9581 NT is an unreinforced grade and can be used for multiple applications in different industries; aerospace-, gas-, oil-, automotive- and the medical industry. This semi crystalline thermoplastic provides high temperatures, excellent mechanical and chemical resistance properties. The excellent layer adhesion of LUVOCOM® 3F PEEK 9581 NT improves the impact resistance, strength, durability and the printing process.

Features

• Lehvoss Luvocom 3F PEEK 9581 inside

• Suitable for applications with a continuous service temperature of 250°C

• Short term service temperature of 260°C (during lifetime max. 200h)

• Heat deflection temperature of 145°C

• High Z-strength

• Excellent mechanical properties

• Flame resistance properties according to UL 94 V-0

• Exceptional chemical resistance properties

• Cytotoxicity proliferation according EN ISO 10993-1

Packaging

LUVOCOM® 3F PEEK 9581 NT is available on carton spools, repacked under quality control of Lehmann&Voss&Co

Additional information

Recommended temperature for heated bed is ≥110°C. Adhesion is possible on different surfaces. LUVOCOM® 3F PEEK 9581 NT can be used on desktop FDM or FFF technology 3D printers able to reach the required temperatures. Dry the spool before printing: 6-8 hours at max. 120°C or 4 hours at 130°C. Note: brass nozzles are not allowed – this contains copper which is reactive with PEEK.

Storage

Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.